Page 71 of 132
Mini Truckin General \ Michigan Metal Works ---- Updates : Please Read.Michigan Metal Works ---- Updates : Please Read.
views 56732
replies 1319
following 232
laid720
+1y
Hey taylor, how much are the c10 arms and when will the lower ca be ready? how much extra for the caps and the stainless insert?
jeebus @ mmw
+1y
The Jeebus Joint uppers, just like pictured above, are 499$ with all that stuff on them. I do the extra touches and stainless stuff at no extra cost if its pretty basic and not super time consuming.
Lowers will be released at the end of the month.
Taylor
Lowers will be released at the end of the month.
Taylor
tuckinlugs06
+1y
hey i asked you about some batt plates awhile back ...would it be cheaper for powder coated steel plate or is the alum plates cheaper
jeebus @ mmw
+1y
Powder coated steel is cheeper.
Had a good day programing last week and came up with this.
Its the little things that count! On the left, my old style Jeebus Joint cap, it served its purpose well, but on the right is how ive all ways thought they should look in my head. Its a minute detail, but makes all the difference in the world. just a bit of extra programing time, and radiused caps are now the standard.
Had a good day programing last week and came up with this.
Its the little things that count! On the left, my old style Jeebus Joint cap, it served its purpose well, but on the right is how ive all ways thought they should look in my head. Its a minute detail, but makes all the difference in the world. just a bit of extra programing time, and radiused caps are now the standard.
jeebus @ mmw
+1y
Ok, been a pretty busy couple week. Heres a few updates on new products. i wont bother you with repeat products, since they look pretty similar.
Anywyas. I had some ranger owners contacting me about producing a Jeebus Joint control arm set for them, so this was the first set. CNC machined to fit the ranger spindle directly with no drilling of the spindle, Its somewhat of a hard shaft to replicate because its not tapered or anything, but has a odd beveled section to it....
Another customer needed a set of 99-05 Chevy 1500 arms. Did him a set of Jeebus Joint uppers with ball joint lowers to lay on 22s, but they appear to have enough travel to lay on a 24 as well.
He needed the uppers powder coated, but the lowers were raw for some welding he wanted to do on them for some odd shock mounts?
Lowers 99-05 Chevy 1500
Uppers 99-05 chevy 1500
Did some 94 dodge ram uppers and lowers. Uppers in Jeebus Joint style, lowers in ball joint style.
Anywyas. I had some ranger owners contacting me about producing a Jeebus Joint control arm set for them, so this was the first set. CNC machined to fit the ranger spindle directly with no drilling of the spindle, Its somewhat of a hard shaft to replicate because its not tapered or anything, but has a odd beveled section to it....
Another customer needed a set of 99-05 Chevy 1500 arms. Did him a set of Jeebus Joint uppers with ball joint lowers to lay on 22s, but they appear to have enough travel to lay on a 24 as well.
He needed the uppers powder coated, but the lowers were raw for some welding he wanted to do on them for some odd shock mounts?
Lowers 99-05 Chevy 1500
Uppers 99-05 chevy 1500
Did some 94 dodge ram uppers and lowers. Uppers in Jeebus Joint style, lowers in ball joint style.