Unusual Fabrication LLC

I got your e-mail Tony, i'll shoot you a reply on Monday!

Just messing around with some stuff in the shop...

Started making a rear end fixture for the chassis table:

Got the rear end up on the table:

^^^Sweet Idea!!

Very very good idea for that frame table jig. I love it.




Taylor

Thanks guys! I wanted to be to make adjustments to the wheelbase as well as adjustments for different tire sizes. Those arms will fit anywhere on the table and have 16" of adjustment front to back. The uprights can adjust up and down from 12" to 22" (or a 24" diameter to 44" in diameter). I think I am going to add an adjustable bar to attach the two legs together as well as a piece to hold the pinion and be able to adjust it. I've been getting more and more chassis table work and I was getting sick of scabbing stuff onto the table to hold the axle so I need a more re-usable solution. The front end is next.......

Awesome work man. Love seeing your updates!

Thanks Randy, glad you enjoy them!

Edited: 12/20/2011 2:35:57 PM by UnusualFabrication

Its been awhile since i've updated this thread. Been busy with stuff in the shop and i've added some more machinery so I had to do some major re-organization.

Mill and VFD hooked up and running, ready to start making chips...

Picked up a few vises from a friend, not bad for $100...

I tore the vises down, cleaned and lubed everything and put them pack together...

I've always done all my own mill work but now I don't have to go somewhere else to do it...

Price on a wishbone? not the whole link system but I am needing just the wishbone.

--------------------------------------------

Puddin said:

Price on a wishbone? not the whole link system but I am needing just the wishbone.

--------------------------------------------

Shoot me an e-mail to Chris@UnusualFabrication.com with some dimensions. I'll also need to know what ends you want to use and if you want them adjustable or not.