threads
Page 7 of 9
Air Ride Suspensions \  BEWARE!!! Dotlow rides horrible work

BEWARE!!! Dotlow rides horrible work

Air Ride Suspensions Q & A
views 5962
replies 83
following 60
 
thacru78   +1y
Ha..missing the sway bar. News flash homie...95% of the bagged trucks on the road don't have a swaybar...and 50% of those don't have front shocks. Lol
DANNY27   +1y
The pics speak for themselves. He first of all didn't get what he asked for. And then to make things worse he received his truck back in this condition. Poor welds. Ruined paint. Overall hack job. Butler, you took a chance with a shop that you knew very little about. But the worst is over now. Time to stop bashing. You've made your point. Your problem hasn't and probably won't be resolved but atleast now your truck is being repaired. Things can only get better from here. Hopefully you're new builders know what they are doing. Good luck with your build.
LaidNeon   +1y
Edited: 12/15/2011 12:05:25 AM by LaidNeon

im not going to get into a he said she said blame game with this guy. there's alot being left out from his story & alot of it has been twisted. no this isn't the best work i have done. i've got no excuses for what went on & yes i did dick the guy around, that i am guilty of. i can tell you this guy was a witness to the majority of the work being done & he even helped out by giving a hand when needed. there is no making things right with this guy. he had no problem with any of the work that was done to the truck until after it left. if there was a problem he should have addressed it then. If he wants he can bring it back & i'll stock floor it for him. im already hard at work on my redemption to show what kind of work i am capable of doing.

I to this day give potter credit for building my truck, i've never once not said that. he wont take the credit for my ORIGINAL motor in my truck blowing up either, but thats another story
TONY95CHEVY   +1y
--------------------------------------------

thacru78 said:

Ha..missing the sway bar. News flash homie...95% of the bagged trucks on the road don't have a swaybar...and 50% of those don't have front shocks. Lol

--------------------------------------------

Yeah I've drove them with and without on shocks and swaybar. Handles better with than without.
nstalker42   +1y
Butler145- if you were there for most of the work why didn't you say something when it was getting done?
droppedmitsu   +1y
Edited: 12/15/2011 12:49:21 AM by dropped87mitsu

Not getting on any ones side but just pointing out that just because he(butler145) "might" have been ok with what work he saw done, anyone that owns a shop should know that it wasn't done safely or properly from what some of the pics show.
LaidNeon   +1y
Edited: 12/15/2011 1:09:32 AM by LaidNeon

this is true, but im also going to point out that im a very ugly dude & at certain angles i could look like tom cruise. truth isn't always in the pics, put a stress test on that shit & tell me how it holds. will it with stand 700 hp?? probably not & im referring to the axle tabs BTW. the job wasnt meant to be rushed but in the end there were some over sights. when you're wrong you're wrong plain & simple. he could of also "tried to contact me" after he made these discoveries instead of running to the internet. just because i didnt answer back to the texts or return any calls didnt mean i didnt get them.
butler145   +1y
yes we all know you ignored all my calls. and there is no twisting anything. i was there to see that you were working on the truck like you said you had been for months and i asked about the tabs if they would hold and you said oh yeah they would hold. and you knew how much power the truck had and you still built it not to hold. and only thing i helped on was taking my air compressor off for the horns. and once the stuff you did was there, there was no getting you to change it since it took this long to get you to do anything. should of done it right the first time. and half the stuff i didnt see till i got it home and took the bed off to really look over it all and see what was all left out. and alot of the stuff i asked when you were going to be doing it and you would say tommorrow night and then so on but still was never done. yeah i mean only thing strong was the link bar, just cause its a solid piece of metal with no welds in it. not even the welds or tabs where you hooked the link bar to the axle are welded on good. there the same as all the other tabs.

and to think i would bring my truck back to you for you to do more work would be the biggest mistake ever! you saying something like that is exactly like you saying you were going to start working on my truck for over 4 months. there is no truth to it. like everything you say. you know you didnt build my truck right and do it right you could of just gave my money back when you left it sitting outside your shop.
pickle   +1y

post photo
PHATTIREGUY   +1y
u should give him back his money, it would be stand up.