I wanna lose the emissions crap

Can i go ahead and remove my wires then? i have already shaven my wipers. lemme know.

if your running a weber and dont have wipers then take out all the wires on the pass side

The vacuum lines on the carb are not emissions per se, they are the load sensing vacuum feedback system for the carb. If you pull them off, even some, the carb will default to a rich condition in "limp home" mode. Rich running cools combustion, washes the cylinder walls and causes premature wear of the bores.


The air injection tubes on the exhaust manifold can be plugged with an 80's model GM truck acorn lug nut. Adds a bit of chrome underhood too! Just slather some jb weld in them and screw them right on. The lower tubes require you make a block off plate, but any one with a scrap of strap and a drill bit can accomplish that.

^ listen to the man

either deal with the stock carb or get a weber

I NEED A WEBER

weber rocks man its the way to go i got the 38 and it makes things too easy

caps lock i welded the shit up on the exaust manifold it worked good then i got a header
u can plug em up but u might as well just go with a web cause itl look cleaner and run better