miata motor?

u can use the mx6 block but the dizzy would be in the rear so u either need to make a new firewall or get MSD. the intake manifold points to the firewall so u would need to make a bracket to flip it forward. and u could get the gt one with a turbo. mazdatruckin.com has more info on it.

thanx id really like to do the mx6 but this is my first swap so i dont really know if there is someone local who could help i would pay for some help n direction

does the miata and mx 6 motor work with the 2.2 trans and motor mounts

well i know that you can use a miata tranny on our trucks if you swap the bellhousing the tailshaft so i would assume it was vice versa as well.


im seriously thinkin about the miata swap or the 4g63 swap in the future. to bad my engine is a fresh rebuild and runs to good and reliable to just swap out at the time
-justin

does miata motors fit 2200 mounts

BP is same bellhousing as RX trannys.

KLZE DOES have a rear wheel tranny. MPV that came with the V6.

Do a 96 block (solid rotating assembly) and a 99 head(adjustable rockers and turbo manifold will mount) If you can get the 99 harness and pcm thats a plus but if not do a mega squirt. I was thinking about the same swap and have buddy that is a miata enthusiast that works for gm! haha

This might help has info on Bellhousings and other engine families.
Mazda 4 cylinder Engine History and Interchangability Guide

what are you smoking? because i want some!

rx != bp/b6

kl/kf/k8 != je

if you are trying to tell me that the k series and J series V6 engines share the same bell pattern, you had better have pics to prove it. when you post them, i will electronically lick your feet :-)

the rx/bp thing is definitely not true though.

till then, no, not close.

eewe.....kinky


thought ya'll might like this link since your talkin 'bout the miata engines