help with fourlink measurements

whats up everyone i got a couple of questions im wanting to do a reverse 4 link on my mazda ext cab the problem is im in Iraq right now....i just baught my fourlink from suicidedoors .com and i dont know the measurements so they can build it for me so im in a bind now lol is there any way anyone can take some measurements all i need is the width of the rear leafspring bracket and the distance from this braket to the axle so ill know how long the bottom bars need to be im not too worried about the top bars cause im gonna rebuild the factory srossmember out of square tubing i need these asap thanks for any help

Do the link forward man!! My bars are 32" long and i ran them all the way up to the back of the cab to pinion change as little as possible..

ok ..but where do you have the front bars mounted ..theyre on the inside of the frame right ? cause the reason i was going to mount them to the rear is so i wont have to worry about draging the front link mounts cause alot of ppl mount the tabs where the front leafspring mounts were but if it will work i can mount them to the inside of the frame right?

Here's a pic of my rear suspension Just make your own crossmember don't mount the lower bars where the stock front leaf spring goes u will drag 4 link bar...lol..The bars could be mounted on the outside of the frame but its alot easier to put them on the inside..Once u get it all ready to install let me no i'll give u some pointers...

ok check it out the link abouv will show you what four link i baught mine only has one baron each side for the bags to mount on and to to keep the rearend in line ...so i can run a piece of tubing across the front of the frame and mount the bars to it right do you get more lift with this ?

If your running a bag on bar set-up your gonna get good lift no matter what if u set it up right...Do u no how to set up a bag on bar kit?

dude i didnt get a chance to call my boy yet, but i just noticed you said you were gonna run a REVERSE 4 link, take my advice and dont do it, do a forward link reverse is nothing but trouble, i ended up having to have mine re done from reverse to forward because of all the problems i was having, save yourself the hassle and do it forward

i ran my fourlink reverse and i havent had any problems...its cantilever too. what problems did you have w/it drpdmazda?

How do you set up a bag on bar kit? I just got my bags today so any help would be great.