shaveing the rear end?

thanks alot for all the help guys

just wondering another thing how time consuming is it and does anyone have any kinda liek step by step pictures? or anything? and how do you guys make the stuff like the licence plate box would be ptreey easy it hink but what about bending the roll pans and stuff? what tools do you use and how do u do it?

well the roll pan is flat except for the body line at the very bottom. you can just mark out where it has to be bent and take it to a welding or fabricating shop and they will bend it in the break press. i think its like and inch up from the bottom. if you look close at mine i didnt even do that mine is just a piece of flat metal. and tail light filler are a little harder. it took me about 2 hours to make each one. alot of bending and relief cutting and welding because the steel has to be bent in 2 directions in the same spot so you have to cut reliefs in so the steel doesnt wrinkle. or just buy some.

thanks man that helps me out also i see people cut the stock roll pans off some times befor they put a new one is that what i have to do? or just weld a new one over top of it there?

also slammed91b5000 what kind of tail lights do u have in there and how did u cut thoose patterns? ive been wondering that for a while and Baggedb22 i ahve a question if u read this again ro if anyone has info on it it looks liek the lic. plate box is behind the A of mazda soo im wondering how u got it behind there with the a going out over the lic. plate box it looks pretty kool, let me know thanks everyone,


DJ

dont get a skin from FBI

I was thinking about welding my gate shut but u people are saying to weld in some sheet metal to fill the gaps. But how do you hold them in place? I was thinking of mabye using a magnet to hold it in place why u weld. I'm not shure if it would work though. How are u guys going about doing this?

I c-clamped my gate shut but i didn't put filler in it just filled the gap, but not in a big weld just tacks...

yea well i got my tail gate now and im saveing for my mig soo im thinking im going welded shut