cmiller_10
+1y
does anyone have any pics of the channeled frame? just wonderin cause that seems easier
mazdaman82
+1y
when i did mine i took the xmember out and welded a bar across it that was smaller then drug the rest off so it layed flat 
droped 2"3/4 just past the pinch,let the truck roll the rest under
and cmiller you channle the frame..you cut your floor around it and drop it around and recap it..
droped 2"3/4 just past the pinch,let the truck roll the rest under
and cmiller you channle the frame..you cut your floor around it and drop it around and recap it..
Post was last edited on May 17, 2011 01:05. This post has been edited 2
times.
dropped90(justin)
+1y
mazdaman how much are you bd'd? im having everybody put that info in so we have a quick reference to look at.
-Justin
-Justin
drgnby
+1y
Really the best thing to do is to just put a sheat metal floor in it. I'm just about done with mine pretty straight forward and you don't have to worry about were you cut the floor at just cut the whole thing out you can even cut the back wall out and sheet it in also. All you need is 16gage sheet and sum 1x1 square tube for bracing. Ill try to post sum pics
91extcab
+1y
Here is about the beginning of tuckin20s (tavis) channeled body drop... I'm not gonna copy and paste the info and pictures from his build page from my phone...