Project: Tango

aight i changed my mind about my wheels. ima get these



they are 18's

i also have some questions. do i need to tub my fire wall for these? will they hit my clutch master cylinder with a body drop to the rocker? thanks

btw i got my second official "injury" while i was workin today when my hand got too close to the grinder wheel and my nuckle got nicked by the cut off wheel. its nuthin serious but its gonna leave a cool scar haha

toy 5 lug conversion?
Ilike these wheels too!

yep yota axle out back and redrilled hubs up front.

cool, some guys use yota spindles , somtimes ya just use whatcha got, right?

yea im tryin to do my truck on a budget. i was really wantin to go with 20's but i cant afford tires for them and since this is my first truck i want to keep it simple and as clean as possible

lovin it bro... keep us updated!

Damn bro, I like! Actually, I have seen a B with big wires tuckin (18's if I remember right). Depending on the rim width, a "Standard" offset may tuck. I have a 13x7 standard and they clear just fine in the rear. If that is a 20x9 your outta luck.

yea those are 20x8's i think. im glad somebody told me they wouldnt work cause i would have def bought them this summer.

i took my spindles to my vocational school a few weeks ago to get the lower ball joints pressed out b/c the pickle fork i rented wasnt big enough to get them out and my auto tech teacher said that whoever put the balljoints in must have used an impact to tighten them down cause he's use a few different tools and pullers to try to get the balljoints out and he's had no luck so now he's gonna either have to cut and drill them out or torch them out either way ima need new balljoints and i hadnt planned on payin for new balljoints but w/e. im itchin to get back on track with this build cause i dont have a lot of time to do it

Great pics its nice to see how things need to be done.