my mazda headache

truck is looking badass bro.

do you have some pix of the side of the frame? im wanting to do somethn similar but id like to see some pics to see where you started the new frame,and how you joined them.

and also what did you do for body mounts? i noticed in the one pic that you made a new floor structure in the cab.

Thanx N|ck

looks badass man. i love the stockfloor, what control arms are you using?
i see u got an AAC sticker, you from ontario?

idk about him but when i did my stock floor i had to redo my back ones and i used a piece of 2/3 and cut the bottom off which made it like 2/3 channel and on the front i used the stock ones but because i went so much on my bd i had to bring the cab mounts in the truck 1 inch hope this helps ....... low intentions 4 life

Heres something you won't hear then, you are right

As far as the doors, nothing has moved or been loosened, but the top of the window frames are bent out and stick past the driprail lip.

90b2200, sorry, no close up pics of the frame, we forgot that part. As far as the body mounts, I used extra 4-link tabs and drilled the hole out larger to fit a Toyota 2wd pickup bodymount puck instead, then just bent a piece of 3/16" flat around and welded that on for extra mounting on the frame.

Mike, I'm using the CanDo Toyota swap arms, and love the setup with them. And yeah, I live in Windsor, good to see a local on here.

are your window frames sitting flush with your B piller?, they should be, i just checked 2 of my 3 trucks lol

looks badass man. i like the shave work.






-justin