Page 3 of 3
Mazda Projects \ 1990 Aussie ford courier build1990 Aussie ford courier build
views 4528
replies 23
following 9
daeman
+1y
cheers for the coments so far guys.
updates and progress have been a bit on the slow side over the last little while, but here's where im at now.
fuel filler and 4wd plastics holes have been shaved.
as has the rear seam and tie down holes (although not in that pic)
Now i have the truck up on stands and have been getting into the rear section of the chassis a bit. stripped out the fuel tank, diff and exhaust. have also cut around 370mm off the rear of the chassis.
<a><img></a>
Over the next week or two i'm hoping to have a final template for my notch plates done, rest of my body mounts cut off, notch plates cut and fitted and i'll see what else i can get sorted while im at it
updates and progress have been a bit on the slow side over the last little while, but here's where im at now.
fuel filler and 4wd plastics holes have been shaved.
as has the rear seam and tie down holes (although not in that pic)
Now i have the truck up on stands and have been getting into the rear section of the chassis a bit. stripped out the fuel tank, diff and exhaust. have also cut around 370mm off the rear of the chassis.
<a><img></a>
Over the next week or two i'm hoping to have a final template for my notch plates done, rest of my body mounts cut off, notch plates cut and fitted and i'll see what else i can get sorted while im at it
v8mazda4ever
+1y
You can get these trucks here there is a guy out of alberta canada bringing them here. What all do you need for your air ride kit I might be able to help you out.