lowb2200's daily dragger

umm...... Thats a pretty broad statement, lol, Elaborate?

i dont understand y it wont lay out with the fender wells because its not hitting the fenderwells and your telling me i need drop spindles to make it go all the way down? y doesnt ayone use the drop spindles then?

im planning on having the rearend done by next weekend because i want to start driving it again my other b2200 is not running very good and i had someone offer me 800 for it and being 17 i dont have alot of money so i need to sell it so hopefully it will be ready to go minus the bd'd bed in about 2 weeks

IM not saying you need drop spindles, I am not even running those. But I know that with my z71 16" rim with like a 40 series or 50 series...? I dunno what series but its really tiny lol, My tire tucks in past the fenderwell. So Im sure if I dodnt cut it out I wouldnt be laying the front out completely. Mine hit hard, I also have flipped bj's but I mean either way, You should have to cut em out.

ok i will try that im running a 50 series tire but i was looking t it and it didnt even lok like it was going into the fenderwells and if that doesnt work i dont know what to do
i cant figure out wat could be wron because we put the brackts on an angle to make the bag collapse all the way and straight it only has about an inch until it hits the steering but im starting to think drop spindles will be the way to go

oh yeh definetely get to cuttin those fenderwells out. thats whats holdin you up. how far exactly do you lack before the crossmember lays out?





-justin

looks like about 2-3 inches

but it also is not on the ground and im sure the tires will squat a lil bit

also make sure and look in the engine bay at the upper control arms. i have 17's on my truck and the upper control arm was hitting the fenderwell keeping it from laying out. just a thought. are your balljoints flipped?






-justin

yes the ball joints are flipped and i will check tomorrow night wen i go back to my dads im at my moms and im going with my friend tomorrow on a cruise with a bunch of bimmers