Page 1 of 6
Mazda Projects \ B22Mazdawg Daily DriverB22Mazdawg Daily Driver
views 4779
replies 59
following 13
90-b22dawg [andrew]
+1y
I've been here for a year now and i have been through a lot of changes and have bought alot of items from mostly bscene members, ive never really posted many pictures along the way, so here ya go.....
When i bought the truck it already had a static drop and the eskies(with no tires) piror to going to pick it up (about a week earlier) i bought
some tires.... so on the way home with the truck i got the tires put on the eskies and ditched the stock 15" steelies
So heres it is shortly after i first brought it home....
Installed a 14" Colorado Kustoms steering wheel about a week after i bought it (wheel is turned in picture)
About a month after driving it (with no stock horn) i put in an air horn set up (150psi to a tripple trumpet horn under the hood)
this was a few months ago (tires would rub inner fenderwells while driving so i raised it back up)
This was the grille i had on the truck (SOld it to Justin Dropped_90) i bought a phantom from a guy on here just have to get headlight recessed...
Bought this 89 2600i 4x4 with the intensions of putting the 4x4 sheetmetal on my truck, got into a bin and needed some money and sold the fenders and bed to izulowtoo
i still have the bubble hood which will go on after i get the tail all smoothed out, still have whats left (cab and frame) of the truck
Installed 2 12" Kicker L7's in a custom built box, HiFonics Brutus amp, 1.5 Farad Cap, 0 gauge monster wire, 6.5 hifonic mids, 6x9 3way hifonics, and a few sets of tweets (must of deleted the pictures but there are some in my garage)
I bought this cd player from a guy on here (which i dont see on here much anymore) Pioneer with a Ipod interface (which allows me to control the ipod through the cd player)
BOught some clear tails off ebay, also bought some chrome tail trim off hocbj (not pictured below)
Bought a flush fit bed cover, weber carb with modded intake mani, some 95 Caddy tails, Got some 2" Drop spindles from Dev, Bought some 18" Navis (and got them redrilled just need tires now), strobes for the corner lights and a 14" electric fan, but don't have pictures of any of that stuff right now....
I'm going tonight to pick up a pair of MTX 9515's, I already have a HiFonics Brutus amp, just need a 1 wire gm alt and battery.
Bought a roll pan from mazdawg(Mikey), and a tail skin from aaron_dwarnock90mazda (now all i need is some tail fillers, caddy buckets, 1x1 square metal for bracing skin, some sheetmetal to cover the back side of the skin after its installed to make it look stockish and so i can have the bed liner sprayed on it)
Heres basically how she sits today
When i bought the truck it already had a static drop and the eskies(with no tires) piror to going to pick it up (about a week earlier) i bought
some tires.... so on the way home with the truck i got the tires put on the eskies and ditched the stock 15" steelies
So heres it is shortly after i first brought it home....
Installed a 14" Colorado Kustoms steering wheel about a week after i bought it (wheel is turned in picture)
About a month after driving it (with no stock horn) i put in an air horn set up (150psi to a tripple trumpet horn under the hood)
this was a few months ago (tires would rub inner fenderwells while driving so i raised it back up)
This was the grille i had on the truck (SOld it to Justin Dropped_90) i bought a phantom from a guy on here just have to get headlight recessed...
Bought this 89 2600i 4x4 with the intensions of putting the 4x4 sheetmetal on my truck, got into a bin and needed some money and sold the fenders and bed to izulowtoo
i still have the bubble hood which will go on after i get the tail all smoothed out, still have whats left (cab and frame) of the truck
Installed 2 12" Kicker L7's in a custom built box, HiFonics Brutus amp, 1.5 Farad Cap, 0 gauge monster wire, 6.5 hifonic mids, 6x9 3way hifonics, and a few sets of tweets (must of deleted the pictures but there are some in my garage)
I bought this cd player from a guy on here (which i dont see on here much anymore) Pioneer with a Ipod interface (which allows me to control the ipod through the cd player)
BOught some clear tails off ebay, also bought some chrome tail trim off hocbj (not pictured below)
Bought a flush fit bed cover, weber carb with modded intake mani, some 95 Caddy tails, Got some 2" Drop spindles from Dev, Bought some 18" Navis (and got them redrilled just need tires now), strobes for the corner lights and a 14" electric fan, but don't have pictures of any of that stuff right now....
I'm going tonight to pick up a pair of MTX 9515's, I already have a HiFonics Brutus amp, just need a 1 wire gm alt and battery.
Bought a roll pan from mazdawg(Mikey), and a tail skin from aaron_dwarnock90mazda (now all i need is some tail fillers, caddy buckets, 1x1 square metal for bracing skin, some sheetmetal to cover the back side of the skin after its installed to make it look stockish and so i can have the bed liner sprayed on it)
Heres basically how she sits today
Post was last edited on Apr 17, 2009 08:04. This post has been edited 4
times.
90-b22dawg [andrew]
+1y
yeah me either till i started looking atl all the pictures i have lol.... ive even bought another set of eskies since the first set got ruined, an elderly lady pulled out in front of me on a busy 6 lane hwy and i had nowhere to go but over the curb and it dented the poo out of 2 of the rims.... now all i need to do is get off my lazy ass and start building this truck.....
90-b22dawg [andrew]
+1y
oh and btw its my daily and currently the only vehicle i own.... so thats another reason i haven't done much with it besides buy parts.....
dropped90(justin)
+1y
i know the feeling i had to sit and look at air parts in my floor for like 6 months before i could do anything with them.
-justin
-justin
dropped90(justin)
+1y
oh and you wouldnt happen to wanna get rid of that brutus amp would you?
-justin
-justin
90-b22dawg [andrew]
+1y
no def not... im going to need it for the 2 mtx 15's that im going to pick up here in a few hours...... ebay has then for little less then $400 shipped
dropped90(justin)
+1y
got a link of your exact amp or a different one that you would have went with if available? i have like an off brand 2400 watt amp so i figure it may be pushin like 1600 but its no crisp enough of a sound for me. i want one that is gonna put out alot of sound but be really crisp. i want monoblock. i have the two kicker comp 12's rated at like 1800 i believe together.
-justin
-justin
oicu812
+1y
You wouldn't be interested in selling the bumper off of your spare pickup would you?
-Russ
-Russ