project "cheap azz" update 1-6-12

looks great hotwheels. keep it up ma old ass brotha. lol.

nother pic
moved the clutch master up 1" bolted it all up so i can start running lines




randy

Looking good Randy!!! Is the resevoir gonna be for the clutch and brake master cylinders? Was running into the same problem today with my tire hitting the clutch master cylinder when fully laid out. May have to "move up" as you did to get enough clearance.

im really gonna have those problems with my 22's. im more than likely gonna use a hotrod brake booster/pedal assembly and have it mounted uder the cab somewhere. im v8 swapping the engine so the clutch master wont be an issue though.... btw. linn hows the progress coming on the immortal one?

the clutch resevoir is going to sit along side the brake one just havent mounted it yet

it was easy to raise the cylinder took about an hour

randy

got the rest of the firewall welded up this morning

got bored so i bolted the front end on and threw the bed and cover on so i could check body panel fitment

then rolled it outside for a pic

Lookin awesome man!! I like the clutch master cylinder too. You are doin a great job hidin everything

ok got a few more things done to the truck
pulled the engine/trans from the donor truck and got it into "cheap azz"
started mocking up the dual carbs


also got the hard lines ran to the remote resevoirs
the lines are just mockup lines couldnt find my tubing bender though gonna redo them in polished line and use a tubing bender.


most of the fab work is done on the engine so i might start pianting stuff soon
woohoo


randy

you gots skillz bro

bump for some hot shit! woot!