Project "Suki" (91 B26i) HID's installed

very cool man

bought brand new body bolts and retaining clips, 1 1/2 inch x 3/8 were the longest i could find, got enough washers with a 3/8 center hole, and used one inside the hood between the retaining clip and the hood, and one between the body bolt and hinge. i did use the bolts/clips with the washers without the hinge first to flatten out the mounting location cause otherwise it was hard to get the bolt to thread the clip, and i couldnt use both washers per bolt. i'll get some close ups of those when its not raining

Looking good!! Keep up the good work.

hells yeah man

so before...



after...

looks good man

just gettin a list of all the stuff i've done so far to my truck...



1991 Mazda B2600i Cab Plus

Exterior Mods

*SFC Model 1530 2nd Design Sunroof

*Shaved Door Handles

*20% Tint on door glass, 5% on all rear cab windows, 2.5% on sunroof glass

*2wd Bed cut down into a flatbed design

*Maxxima Semi Truck combination S/T/T/R LED Ovals

*Static Mount Factory style Mirrors

*Blue "Evil 'M'" Mazda logo on hood

*Oldsmobile Suicide hood hinge modified to fit application

*2002&up Ford Ranger Headlights, turn signal/running light functions reversed for "disappearing" turn signal affect

*Tail light 1157 bulb pigtail wired into corner markers, deleted bumper signals and moved turn signal to corner marker

*Replaced deleted bumper turn signals with halogen fog lights

*Universal Fit over cab marker lights, lenses masked and painted for custom feel

*4wd mazda fenders, and matching bumper endcaps

*Tail light wire tuck inside frame

*Mesh grill insert in bumper

*Rear plate mounted in floating style, with plate light phantom mounted under rear bumper bar

*Semi truck/trailer style steel fenders over rear tires


Interior Mods

*Recovered door panels with black marine vinyl

*Black/blue color scheme on dash, headliner, cab plastics, visors and rear wall

*1996 VW Jetta front bucket seats static mounted to floor

*Cut down shifter, and replaced knob with Billet style Autozone replacement

*Replaced Parking brake T-handle with billet Autozone knob

*Panasonic CQ-C1335U Head unit

*CB radio

Suspension

*Upper/Lower balljoint flip

*Removed upper bump stops in front

*Upper Shock and endlink bushings replaced with Poly-Urethane ones

*Replaced strut bar bushings with greaseable Poly-Urethane ones

*Isuzu 4wd Front shocks

*Airshocks in the rear

*Cheverolet Z71 16s with Hankook 225/55/R16 rubber

*Z71's painted satin black, with a blue lip

*Three Inch drop blocks in rear, main and overload leaf springs only with blocks

*Re-keyed torsion bars up front


Engine/Bay Mods/Info

*Mazda 2.6 liter Fuel Inject G6 engine with 5speed trans

*Three inch aluminum air intake, with Spectre filter, all factory air recirculation parts removed

*Relocated battery to box under the flat bed, driver's side

*Relocated coolant res. to passenger side of bay, bolted to the radiatior

*Power steering res. relocated to forward lower corner, driver side, where factory airbox mounted

*Coil/ignition pack relocated to vertical wall of fender, driver side

*Racing style keyed negative battery disconnect terminal

*Blue Loom engine wire dress-up, wires partially tucked and cleaned up for a better look


Sunroof Replacement Part info

SFC Model 1530 2nd Design Sunroof

Glass Size 13 5/8 x 28 5/8
Outer Frame 16 3/16 x 31 3/16

2nd Design Strip $28.75
2nd Design Glass $96.97

gettin started tuckin wires on drivers side of suki... couple progress pics, takin a break for dinner at the moment, will have it all put back together by later tonight, as tomorrow is once again a work day...

dang your drivers side tire looks super bald