***SkrapinSask from stock to layin frame***

Thats very weird your going to have to pie cut the uppers. mine lays hard in the front with stock spindles and flipped balljoints. Well anyways keep to it. trucks going to be cool once finished. Thats when all the shitty stuff becomes so worth it!

The reason he still has to pie cut his uppers is he is running a big side wall tire still. I will have those Uppers out o you soon bro just ghave to take them off the red truck. I am still waiting for my cando arms to come from Dave but tracking the monies I sent him should be there very soon. Then my control arms will be on theyre way.

Right on guys! Got my uppers today! Time to get back on the project and get the front layed out gain on these wheels. As much as i would like to go with any less rubber my rims would be ruined quickly. Plus this way if i ever decided to run a larger rim with less rubber my truck will lay frame on 18's no problem.

with the final setup i beleive there is no other option but to pie cut the UCA because of the total over all diameter of wheel i am running. do you suggest running the lower s10 joint on top or bottom of the lca? pointing upward or downward?

Hoping to have the front suspension completed today!

well get some pics up then LOL

well today i got her layin out with spindles/ lower s10 lower balljoints ontop of the LCA and a light pie cut on the UCA. I had no choice but to pie cut my uppers but with this bag bracket setup i can easily lay frame on 20" wheels and im pretty happy with that considering this is my first go at air ride. Im going to have to space the lower bag bracket in some way in order for it to clear by the looks of things.

sounds good man but we need to see some pics bro.

Right on this week im hoping to have bag brackets tacked in at the least and im shooting to have the front end fully operational again very soon. Ill be sure to have pictures

Well the truck lays frame and this is just an idea of how its looking bag bracket wise. In order for the bag to clear the frame with the upper balljoint plate ontop of the upper control arm the ouside of the lower bag plate will have to be spaced upward. the level was just there to get an idea of how spaced it would have to be to clear.