B2200 EFI install with Mazda car computer

You are Welcome Brad!

Here is his truck, number three converted!

that is fricking awsome man totally TITS! And are you going to do a full write up on your next conversion?

if i woulda knew about this swap before i sold my engine then its a good chance i would have kept it.








-justin

Thank you- I think it is TITS as well!

I have been crazy busy lately. I work alot and in spare time have been injecting mazda trucks and fixing them as well. I'll get a schematic up as soon as time allows.

nice man!! thats tight im using a megasquirt sytem myself for some good reasons lol

hey madlow, just curious why you used the throttle body from the turbo model instead of the one from the N/A, especially cause the comp if from the N/A. Would it work to use the N/A throttle body?

write up please haha

here is a video I made of my 92 B2200 with Madlowmazda's EFI conversion. you have to wait about 20 seconds into it to see under the hood because the first part is a video of my new magnaflow exhaust, but you get the idea. anyway, here is a video of one of these conversions up and running...thanks to Jim "madlowmazda"!

Also, I don't think Jim mentioned this but the '86-'87 Mazda 626 2.0 lower intake manifold and fuel rail is similar to the FI B2200 part. That's what I'm using on mine. They also are a little easier to find (at least in my area) However, you'll have to "hack" off the EGR mount and have the hole welded up so the "JIM manifold" will fit properly.

This looks sweet! What's stopping you from using a turbo for a donor and bolting on the turbo exhaust manifold/turbo and adding boost to your fun?

Bump, too, for more info on the manifold plenums you've had made. Making more? Cost?

Enjoy!

Karl