B2200 EFI install with Mazda car computer

im trying to figure out my efi harness from a b2200 it seems like there is alot u dont need i just am having trouble figureing out what. lol i dont think there is much really to hook up i just need to figure out the intank fuel pump wiring (b26i pump) and how it wires into the truck harness that remains after the carb harness is gone.

ive got damn near everything ready to go in. everything in my harness is labled all i have to do is cut the harness right behind my headlight n splice the car one in(its where is was cut off). all the wires are the same going to the main fuse block n then i have to hook up a few other wires to the existing harness in the truck. shouldnt b to hard i think im going to just run the FP to the ON on the ignition.

as soon as i get money 4 HP fuel line n a fuel filter its going in.

Was there ever an actual write up on this jim that maybe wasnt posted here? im going to be getting another stock engine to throw in mine and would really like to go this route instead of going with a weber. I would really like to see what wires need to be switched in the plug in connector.






-Justin

well... i now have a pretty good idea on what imma be doing soon is there any other oem mazda manifolds that would work?

question guys,, i found a complete donor car. its a 91 ford probe gt. turbo and everything is all there... other than the obvious of the upper intake mani will cause the tb to touch my fire wall... what other stuff is gonna needa be changed around?

i noticed its a 12valve head, will this lower intake manifold bolt to my 8v head?

Bump.
Not trying to be a pain in the ass jus looking for an answer. Hahah
I now have access to an n/a and a turbod probe....

My question is does anyone know if the lower inake manifold off the 12v probe head will work on the 8valve b2200 head?

Was there ever a write-up done? This is good stuff, I will have an engine ready soon, I have plenty of time to source parts. Good job guys.

As far as i know there was never a write up made. I have pm'd him on here and emailed him as well. Guess he is MIA.











-Justin

madlowmazda is the guy doing this junkyard injection alot of info in those two threads. more so then whats here