about to start baggin

this weekend, im hoping to do my notch. is there anything important to note before i do it? i know how to do it and everything but im talking about something that is easily overlooked. is re running the brake lines easy? or do i even have to ? just stuff like that is what i need to know. help would be greatly appreciated !! Thanks !

how big of a notch you planning? i think the biggest thing is to make sure the front and back sections of the frame are connected and straight before cutting for the notch and welding it in. are you bagging in the same step or just notching for the time being? the brake line should be easy, its just a flex line on the passenger side, just make sure you have enough movement in it so that it doesnt get to tight of get pinched when cycling your suspension up and down.

I have the kind that you have to weld together. and im welding it to the frame before i cut it so the frame stays straight

sounds like you already have a plan then. time to just get in there and do it, its just metal

depending on how big your notch is will depend on what you will have to do...I went with a 10'' notch kit.. and I had to relocate the rear brake abs valve cause it was in the way for the c notch to be welded in...good luck !!!

Its about to happen guys! Just savin up a lil more money first before i send the truck off. Also ordered this for the hell of it lol. I will post updates!!


Sent from my iPhone using Tapatalk

Good luck!

Thanks man!


Sent from my iPhone using Tapatalk

Gauges mounted


Sent from my iPhone using Tapatalk

://tapatalk.imageshack.com/v2/15/02/28/ec1fb1bb67c011df00a6799251208957.://tapatalk.imageshack.com/v2/15/02/28/295542520371ae92848cb26eaeb2e357.jpg


Sent from my iPhone using Tapatalk