1986 Mazda B2000 (Christine)

So i installed some new (used) honda civic seats today. heres how they turned out.

DOG LEGGIN I like that. That's some funny shiznit.

On the Ranger headlight swap are you able to aim them correctly? I would like to do that mod to mine. I'm not interested in running HID's just want to update the look of the front end and could also use the better lighting. Some guys have said that the worst part of the mod is the aiming of the lights it's just a pain.

It all depends on your prefrence. I used all the original adjusters that came with the headlights. It was very easy. Instead of discarding the top adjuster (box with screw adjustment) use it. then under the hood drill a hole and place a rubber gromet in it to prevent any cuts or scrapes. this will alow you access to the top adjuster screw. ill post a pic of mine tommorrow to show you what im talking about. So it is just as easy to adjust my lights, as it would be to adjust a rangers lights. Some people use Eurothatne or some type of epoxy to attache theirs to the grill, This is all great couse you can set the adjustment by hand and never worry about it, but if a headlight gets damaged, or your grill breaks, you would have to replace both headlights and the grill. I figured by making them fully adjustable it would be more cost efficient in the long run.

This is the write up that i went off of.

Well it didnt quiet work out like i wanted it to, but we got the bed tilted. Come to find out my wheels are to wide to do a side tilt, thus giving me clearance issues on my tires and rims. We realized this when we were just about done and had everything welded in place and mounted. so we had to rethink everything, and go with a rear tilt instead. here are the pics.

wow thats looking really good man

Nice work, who made that rear setup for you? It looks super simple and gets the job done. I would like to take some pics of BadDawg's setup someday. I like how low he can get and not having to alter the bed plus the tilt bed is soooo dope.

Well we all worked together as a club and created it outa scrap metel we had layin around. But baddawg was the master welder there, and I have to give props to our boy DJ for coming up with the design concept, Also thanks to Billy and Dallas for coming out and lending a hand. Oh you can check out baddawgs feature here

ya man a weekend of long nights lol .and lots of weld burns! but we took our time and did it right! i think it looks really good man ..i know your happy with it..post up the new pics !~

ok, so we went to work on the truck again today. we managed to knock out the exhaust, and patch that nasty ass hole that someone punched in the back of the cab.















TOMS TRUCK

glad everything turned out good and your happy! now we can get that thing up to paint bro!