threads
Page 3 of 11
Mazda Projects \  Mazda B2K Trailer

Mazda B2K Trailer

Mazda Projects
views 16007
replies 106
following 20
 
crush   +1y
well that wonk work then..... thanks bagdb2200
dropped90(justin)   +1y
Why not just run a small tank and older comp and have management on the trailer instead of running all the disconnects and all that good stuff? just run a power wire in the trailer plug. Its not going to take much air at all to lift that trailer.






-Justin
hunterw   +1y
If you can afford/find them I would do hydraulic quick connects iknstead of regular air chuck ones. The hydraulics hold up better in bad conditions and havge a little more flow. But they are pretty pricey. But worth it imo. Put 4 bags on the beds and make them do a fbss haha. That would be cool haha
bagdb2200   +1y

Why spend the money on another compressor and tank? You'd still have to run a disconnect for the power wire for the compressor, or run another battery, which is more money. And you'd also need another pressure switch. It's easier to just run 10ft of airline, an airline disconnect, and a disconnect for the wiring. He'd need the wiring disconnect even if the trailer wasn't bagged so it's not like it's extra.
crush   +1y
these are all Great ideas, and i appreciate the input guys. I think ima run a tee fitting off my tank, and mount a quick disconnect to my trailer hitch on the truck. then ima use the heavy duty 3/8 rubber airhose and run it inside the frame to the trailer axle. from there branch into a tee and go to both bags. Then ill just mount 2 more valves under the bed of the trailer and and run all the wiring (valves and lights) into a cannon plugin. Oh did i mention that ima do the old buick style flip up license plate on the truck to hide the trailer hitch underneath. then ill install a new switch in the cab and pop it up and be on my way.
toddluck   +1y
Check into getting a home made frailer tagged....its kinda a bitch in washington.....you must have the title if your using the rear frame section...they will give you a slip for the front section so you can scrape it
crush   +1y
well itll be difficult to get the title. it was registered in oregon. However, i do have a bill of sale on it....
baddawg253   +1y
make sure you take the vin off the cab and write it on your bill of sale then you can always file for a lost title .
crush   +1y
I think i can just register it as a home made trailer. ima look into it today.
crush   +1y
Talked to the DMV today, they told me step by step what i needed to do in order to license this thing when im ready. I was told that the Bill of sale would sufise to register this thing as a trailer when all is said and done.