tucnrims Project "Sweet Dreams" update " 2 link is installed

looks like i will have room for the bd in the front. Need to check into the new axle still and then the back should be bd ready with 2wd sheetmetal. pics of the front:

This is my mazda x-cab bodydropped past the rockers without 22's on it for now.

been awhile since i have done an update, so here it goes. I took the head off and changed the head gasket, intake manifold gasket, fuel pump gasket, valve cover gasket. Runs great now.

While doing that ups made a stop at my place:


Got them installed in the front and fixed a bad line in the rear and the truck lifts again. Bags that were in front were destroyed:



i get more lift and more camber when layed out now:





video of the camber:

lately I have been sanding away on it. It is almost all sanded. Started to lay some primer filler down:

made a video from when i got the truck to about a month ago:

Video 2 of project "Sweet Dreams"

I have been away for awhile. But have got some progress done on the mazda. Shaved the body lines next to the tail lights going down. primer gray was done, relocated the rear valves to the tank, changed the interior color.

Did a rendering of how it will look when i get her done:




i will begin to fix the bedsides in the next couple months as well as start on the 3inch bd. and install the 2 link soon after