tucnrims Project "Sweet Dreams" update " 2 link is installed

that i will. thanks.

also i rewired the box down from 4 switches to 2, found a couple leaks and fixed them and got the system installed. cleared out a bunch of useless wires from under the dash. got all the diamond plate crap off. cleaned the interior so it looks not so dirty.

got the running lamps working tonight and got 1 new headlight installed. the pass projector light was trashed so will get new ones later. i did notice that ll my lights flicker bad when running and stepping on the gas. volt meter says 15-16 amps when it is running, what could be causing the lights to flicker like that? going to take out all the power wires for the compressor and put in new ones so i know they are all good, then do some sanding to the hood, fenders and doors.

bad grounds

yup

redid the switches today so i have 1 per bag now. wasn't leveling out with both fronts on the same switch. added some reducers to slow down the drop speed for the front and back. got all the unneeded wires out from under the dash, under the floor mats, etc. took the oil pressure gauge out as it only worked here and there and lowered the voltage gauge down. polished all the chrome on it and did some wet sanding the the bed rails and pass side. also cleaned up the engine bay a bit with unneeded wires going to nothing.

going to go to the metal shop on Monday to see what my 1.5" OD x .25" wall thickness tubes will cost. then buy some 4-Link Weld on Bar Ends. going to 3 link it with 2 bars on the bottom and a wishbone up top as i want to keep my gas tank in the stock location.

nice progress.....rod end supply .com is a good place to get ends and bungs....go bushing instead of heim... heims look nice but get noisey

going to go with:


they are only $10+s&h each.

anyone have a 110/145 PSI Pressure Switch and need a 145/175? mine is almost new, was used for maybe a month. just dont need that high of pressure on this truck.

started to do more sanding and i found flames from the hood to the bed.





gonna see if i can get em to all show. would be nice to run till i can get new paint for the truck.

nice