?'s on 16 valve swap

you may be able to....but don't quote me on that. research and comparisons may be in order!

well how much would just the head swap if the stock intake manifold and efi would work

how much power i mean*

If you check out that link i left it tells you what you need. You can use a 1g turbo 2.0 head with its turbo setup and intake setup which needs to be modified. You just need to plug some oil ports in the 2.4 block. you cannot use the mm exhaust manifold or intake. You will need 1g turbo injectors wiring harness and ecu. the site has good info. I know its in an eclipse but the info is still good. On the site there is a forum with many MM head swaps and different motor turbo trans combos that people have done and most of them are good info.

Here's the link to the forum with lots of head, block and tranny combo's. I realized i didnt leave the link for the forums. There is a lot of good info in the forums for MM on the forum.

Did I say Forum enough????? lmao