pic request: 89-94 yotas drop 2/3 & 3/4...

just like the topic says. im trying to get some pics of extended cabs dropped. preferably with wheels size and tire size. tryin to figure out what i need and what its going to look like.

My 91 model...lowered in the front with DJM lower control arms, reset torsion bars & Toxic drop shocks. The rear has raised-front leaf spring hangers, 4-inch angle blocks, mono-leaf, small c-notch & air shocks. Oh & my rims are 17's with 205/40-17 tires.

I LIKE

Heres my 93 with cranked down t bars, 4in blocks, middle leaf removed and small c-notch. Im rockin' 17's with the 205/40/17's. (I personally think its too high...)

thanks for the pics guys. i think that im just going to have to get new wheels and tires to lower it any. mine are too wide. and i think that the tires are to tall. im looking for a sporty look. not to low, but still looks good.

heres mine on 18's and a body drop

Can you do a 3/4 drop and still fit 18's? A buddy of mine has 4" blocks he'll give me for free. What would be the best way to lower the front if I used the 4" blocks? Any help would be greatly appreciated.

i have the djm lower controll arms in the front and 4in blocks in the back with 18's. i reset the torsions too. you could always just do blocks in the back and then just crank the torsions in the front if your tight for money

You could do what I did with my Tacoma, and drop about 10 bags of concrete in the back....make sure you get them wet first. Works wonders.

Thats awesome!