aboyt to bag the front

Dude the under construction issue isnt even out here yet.

what? i already got a new one yesterday and you havent even gotten last months? whats up with that....isnt the magazine published in socal? lol.

Yea it is. The one thats on stands right now is the one with the blue Blazer and the X-Terror on the front. I've been talking ot Bobby about that article you mentioned for like 3 months now, I want to see it!

yeah the under construction part of last months mag is pretty sweet. i go to school at the college out here with the guy who drives a suicided and bodydropped s-10. he's cool as hell, but other than the construction part i didnt really care for the mag. this months however is pretty sick. the tech article bobby did in it about sectioning the front end of the toyota versus 'Z-ing' the frame is pretty interesting.

if its on shelves and you have a subscription, usually we get it before it goes on shelves...i think you got jacked for your mag.

I don't have a sunscription. I want to see Bobbys article though, because thats how I did my truck.

you sectioned and Z'd your truck? i thought all you did was Z the frame. he sectioned his arms and moved them up so he didnt have to Z the frame. oh wait you had to section the cross member up underneath the oil pan huh?

Seth you need to ask santa for a subsciption.

I sectioned the lower arms mount to raise it up. And I raised the upper arm mount up the same amount, and raised the steering box and idler arm up too. Same way he does it.

I still dont understand how he got the upper bag plate to be at the underside of the frame rail and still lay out with only sectioning 1/2" out of the LCA? The measurments just dont make sense. On the one I just did, the bag is fully compressed and the mount is about 3/4" from the top of the rail. I didnt section the LCA, but he raised the LCA an inch, which gives even less clearance. Seth your bag plate is close to the top of the rail too.. how is his on the underside?