Does anybody have more pics of this car???

Whats a good cylinder? It's not going to hop or anything, obviously. Showtime has a set of chrome cylinders for under a hundred bucks????

I am ready to order something but I don't want to just by the first thing I see, it alwasy fucks me when I do that.

Anybody know any good sites to check out that has "euro" shit, like cups and springs?

try prohopper.com or redshydros.com

i would say prohopper as well. btw chris, i'm at body shop & i just measured. my shortened spindle is 14" from hub center to top of spindle where the balljoint mounts.

dont you need the reverse flow cylinders for hydro's in imports?

Originally posted by loudciv



i would say prohopper as well. btw chris, i'm at body shop & i just measured. my shortened spindle is 14" from hub center to top of spindle where the balljoint mounts.

Damn, I was hoping the Accord spindle would be bigger than the Prelude. You cut about 1 3/4 inches off right?

Originally posted by pearldrop



Originally posted by loudciv



i would say prohopper as well. btw chris, i'm at body shop & i just measured. my shortened spindle is 14" from hub center to top of spindle where the balljoint mounts.

Damn, I was hoping the Accord spindle would be bigger than the Prelude. You cut about 1 3/4 inches off right?



if i remember correctly yes, but you know how that goes sometimes. lol

That teal Accord with the Ryane spindles made Civic spindles fit so I just need to figure out what he did. The civic ones I have are two inches shorter so that should be plenty for me.

Originally posted by loudciv



dont you need the reverse flow cylinders for hydro's in imports?

I know that that is how a lot of people have went. I was thinking about using a reg one and flipping it upside down, it fits right into the wishbone, I would slide some pipe over the cylinder to prevent it from sliding throught the wishbone. Then I could make a really simple mounting points on the clip. with a few of these super ball things. I know that the fitting would be a problem though coming out the bottom? I really need to find one that I could check out before I buy some. I have such a good habit of always getting the wrong stuff.

But then I wouldnt be able to use springs. Which wouldnt be horrible, but if I used springs it would look a lot cooler if I had some kind of suspension other then just a small cylinder.

Computer problems??

so chris the civic spindles are two inches shorter than the accord spindles?? that is awesome!!! i wonder how long the integra spindles are....