The Uni-body Drop has Started (New Pics pg 16)

Looking good man!

the coolest neon i've seen.

by the way your camera takes good pictures.

Thanks Joe, its an Olympus Camedia C-4040

So i solved the issue with my new welder & got the right connections. Then i made a converter plug / extension cord so it will plug in with the washing machine plug. turns out its just a different style 220 plug that the welder came with. So anyways, i got my front brackets made today!!

alot of fab work in that thing. its looking good.

and there's still alot more to fab up

Ride is looking real good keep it up!What size wheels are you running now?

You could probably build new lower arms, and triangulate them to eliminate the strut rod. I did that on my front suspension.

17s for now. One day i might run bigger, but the front end will need more cutting & the alternator will have to be relocated to the other side of the engine. My rear can take a bigger wheel with no problem as it sits right now

Originally posted by TwistedMinis



You could probably build new lower arms, and triangulate them to eliminate the strut rod. I did that on my front suspension.i wont have a strut rod. I bought some camber plates that i will be mounting to the top of an upper bag mount. I needed the bag to be mounted over the tire so the tire will not rub the bag or anything else. once those parts come in, i can finish up the front end.

I was talking about the back. With the cantilever. Because as ti sits not it looks as fi nothing will be keeping the rear wheels in place, and you meantioned something about relocating the strut rod.