'97 Integra... SMC Cans, Front Not low enough... back is fine.

i had 18's on my 2 dr integra and the frotn the rim was just about tucking i used eai's both front and rears are the same

those forks that go below the air cylinder and around the cv axle, how much can i shave off or has anybody had made custom ones cause it took it out and jacked up my rims so the tire would be flush with the side skirts, im not making any sence, no sleep, has anybody fucked with those, how can i get my car down

i trimed mine on my accord. i dont really remember how much i did. it probably was 1/4 to 1/2 inch. worked great

Edited: 1/8/2007 5:26:51 PM by eatinpavement

did you cut a hole in the strut tower for the control arm to come through? this will make a big difference about a 2x3 or 3x3 hole.a few pics of the ole teg and hatch.... the teg is on 18s

with just air clyinders on my 98 civic the upper control arm didnt hit but i cut it out anywayz cause im gonna do whatever it takes to layout on 20s

gotta get rid of the cylinders and do 2500s mounted to the upper arms

Originally posted by choppedcivic98



those forks that go below the air cylinder and around the cv axle, how much can i shave off or has anybody had made custom ones cause it took it out and jacked up my rims so the tire would be flush with the side skirts, im not making any sence, no sleep, has anybody fucked with those, how can i get my car down

yes mine are sectioned 1.5"s