AIM/Chassis Tech Discussion - Get Help

Originally posted by pearldrop



Hi Joe,

I bought a set of air cylinders and a digital guage kit for my Accord wagon back in 2003. I was very impressed with how fast everything came. I put the cylinders in immediately and they worked perfectly and never gave me any problems. I waited over two years before I got around to installing the guage and it gave me nothing but trouble. No matter what I did with it, it would beep constantly that the pressure was too high or too low. I had the guage in my car for less than a week before I gave up and took it back out. I don't know if this was from the problem with the senders or not, but it sure felt like a huge waste of money, and time.Of course, five years later I don't have a receipt. I have just written it off as a lesson learned.So the guage sits in a box in my closet.



Chris, I have posted in my ads and on line that we had senders for digital gauges that read wrong and that I would replace any of them at no charge. Just give me the name/address/phone you purchase under and they shall be yours. You do not need a receipt. Tx

Thanks Joe, but Travis already took care of it. I appreciate the fast response.

I do have a question. Is there a reason that nobody makes drop spindles that are more than a two-inch drop for S10's? I always figured that they made a two-inch drop spindle because they could always be used with a stock tire. But now, with so many people using 20s and bigger there would be a market for a three-inch drop spindle. It would make it a lot cheaper and easier for people to lay out on those big wheels.
Thanks,
Chris

is chassistech.com a wholesale sight only now?

Originally posted by pearldrop



Thanks Joe, but Travis already took care of it. I appreciate the fast response.

I do have a question. Is there a reason that nobody makes drop spindles that are more than a two-inch drop for S10's? I always figured that they made a two-inch drop spindle because they could always be used with a stock tire. But now, with so many people using 20s and bigger there would be a market for a three-inch drop spindle. It would make it a lot cheaper and easier for people to lay out on those big wheels.Thanks,Chris



I believe DJM made 3" drop spindles for a while but have since been discontinued. I heard they were unsafe and were having issues. But my buddy has them on his S-10 and they work great. But havent seen a company make them since.

Well, it's true. Joe is trying to make amends. I recieved a check UPS priority from ChassisTech today for the difference from the advertised price and the price I actually paid for my Rat Tops Convertible kit. So, Joe Thank you for making it right.
Dale
North Dakota

Originally posted by HaVoC1



Originally posted by pearldrop



Thanks Joe, but Travis already took care of it. I appreciate the fast response.

I do have a question. Is there a reason that nobody makes drop spindles that are more than a two-inch drop for S10's? I always figured that they made a two-inch drop spindle because they could always be used with a stock tire. But now, with so many people using 20s and bigger there would be a market for a three-inch drop spindle. It would make it a lot cheaper and easier for people to lay out on those big wheels.Thanks,Chris



I believe DJM made 3" drop spindles for a while but have since been discontinued. I heard they were unsafe and were having issues. But my buddy has them on his S-10 and they work great. But havent seen a company make them since.



It is expensive to tool up for a 3" spindle. While there is some demand, there is not enough to justify the tooling.

Originally posted by roadracer



Well, it's true. Joe is trying to make amends. I recieved a check UPS priority from ChassisTech today for the difference from the advertised price and the price I actually paid for my Rat Tops Convertible kit. So, Joe Thank you for making it right.Dale North DakotaThank you Dale. I will assist anyone who has a problem, whether you purchased from us or not.

Originally posted by SKIDROW



hay joe i have a digatal ride controler i got from airliftand i need new senders will your work all 5 of mine are badand i pulled it out of the nissan years ago

would love to use it in the pathfinder

erikYes, I can think of no reason why they would not work.I will send you senders for $20 each. Email me name/address/phone or just call 800-682-8789 and refer to this post.

Thank you

To all members:

I want to make sure that all Members understand that I will assist you with a problem, or a question, whether you purchased the product from us or not.

Thank you

Originally posted by SoloSpecialties



is chassistech.com a wholesale sight only now?

Yes Chris...Only Dealers can log into Chassis Tech www.chassistech.com

Thank you