Page 9 of 10
Build-Ups \ Swagger Build Thread : 99 f250 Super DutySwagger Build Thread : 99 f250 Super Duty
views 11366
replies 94
following 33
rat49f6
+1y
so greg headed down for Friday night and today worth of workfigure i wont have power so he headed home before it gets bad
made a platform for the Excursion tank to sit on the factory skid plate was just to much and way to heavythe 18 gauge is laid on top of a frame of 1"x1" 1/8" wall grid 4" off the ground
tank in place
from the rear
drivers side
front
video of the suspension (click)
made a platform for the Excursion tank to sit on the factory skid plate was just to much and way to heavythe 18 gauge is laid on top of a frame of 1"x1" 1/8" wall grid 4" off the ground
tank in place
from the rear
drivers side
front
video of the suspension (click)
idrgbdy
+1y
sick ass project! be sweet if it was all done for next summer. then you could roll it a couple hours south and i could shoot a feature on it for minitruckscene.com. regardless, this is gonna be a badass ford when done!!
rat49f6
+1y
--------------------------------------------
idrgbdy said:
sick ass project! be sweet if it was all done for next summer. then you could roll it a couple hours south and i could shoot a feature on it for minitruckscene.com. regardless, this is gonna be a badass ford when done!!
--------------------------------------------
my plans are for a spring completion... id love to shoot a feature with you guys
idrgbdy said:
sick ass project! be sweet if it was all done for next summer. then you could roll it a couple hours south and i could shoot a feature on it for minitruckscene.com. regardless, this is gonna be a badass ford when done!!
--------------------------------------------
my plans are for a spring completion... id love to shoot a feature with you guys
xgolferdude
+1y
come on man... stop messing with easy stuff!!! tackle the front damn ya!!! jk man... i wanna bag my 250 soo bad... are yall just gunna clip it with thechevy stuff or build mounts and steering!!! cany wait to see laid out!!! keep up the good work!
rat49f6
+1y
--------------------------------------------
xgolferdude said:
come on man... stop messing with easy stuff!!! tackle the front damn ya!!! jk man... i wanna bag my 250 soo bad... are yall just gunna clip it with thechevy stuff or build mounts and steering!!! cany wait to see laid out!!! keep up the good work!
--------------------------------------------
not cliping it Gonna make the chevy arms work on the stock frame ...looking back i probably should have just widened the chevy front clip
xgolferdude said:
come on man... stop messing with easy stuff!!! tackle the front damn ya!!! jk man... i wanna bag my 250 soo bad... are yall just gunna clip it with thechevy stuff or build mounts and steering!!! cany wait to see laid out!!! keep up the good work!
--------------------------------------------
not cliping it Gonna make the chevy arms work on the stock frame ...looking back i probably should have just widened the chevy front clip
sledneck91604
+1y
Do you know the width of the chevy clip? A narrower clip might help out when it comes to tucking aftermarket 8 lug rims..
rat49f6
+1y
--------------------------------------------
SledNeck91604 said:
Do you know the width of the chevy clip? A narrower clip might help out when it comes to tucking aftermarket 8 lug rims..
--------------------------------------------
i dont remember but i dont think it would have easily fit the 7.3 as narrow as it was
SledNeck91604 said:
Do you know the width of the chevy clip? A narrower clip might help out when it comes to tucking aftermarket 8 lug rims..
--------------------------------------------
i dont remember but i dont think it would have easily fit the 7.3 as narrow as it was
rat49f6
+1y
well its been a long weekend of moving trucks and parts
fri... greg came down and we cleaned out the smaller half of the Vernon shop
sat... greg and i brought his small enclosed trailer down to swagger shop while my dad and a friend of his brought down his truck with a 20ft gooseneck
got my truck out of the shop and onto the goose neck
i know i know FAIL for having my truck on a trailer behind a cummins
back at the Vernon shop we unloaded the engine, trans and other big parts out of Gregs trailer got the truck off the trailer and moved it inside but not in place
headed back to the swagger shop for the mini excavator and more parts
a pic of the truck laid out in front of the vernon shop
fri... greg came down and we cleaned out the smaller half of the Vernon shop
sat... greg and i brought his small enclosed trailer down to swagger shop while my dad and a friend of his brought down his truck with a 20ft gooseneck
got my truck out of the shop and onto the goose neck
i know i know FAIL for having my truck on a trailer behind a cummins
back at the Vernon shop we unloaded the engine, trans and other big parts out of Gregs trailer got the truck off the trailer and moved it inside but not in place
headed back to the swagger shop for the mini excavator and more parts
a pic of the truck laid out in front of the vernon shop
rat49f6
+1y
back to the swagger shop we went greg in hi truck me in my dads for more partsi completely forgot just how many parts were in that shop
got back to the vernon shop around midnight so we parked the trailers and left themtoday i went and unloaded my powdercoating oven, sand blaster cabinet, tool boxes and band saw
pulled the truck back out to get the bigger ideas in the shop behind itwhile it was out i took some pics of it parked by our company F550 (same height as gregs f250 with 285's)
again i owe greg more than i can ever state
got back to the vernon shop around midnight so we parked the trailers and left themtoday i went and unloaded my powdercoating oven, sand blaster cabinet, tool boxes and band saw
pulled the truck back out to get the bigger ideas in the shop behind itwhile it was out i took some pics of it parked by our company F550 (same height as gregs f250 with 285's)
again i owe greg more than i can ever state