threads
Page 3 of 4
Mazda Engine General \  How can I build horse power in my B22

How can I build horse power in my B22

Mazda Engine General Mazda Engine Mazda Tech
views 3207
replies 32
following 13
 
dropped90(justin)   +1y
okay would like to see the pics. but what your saying is is all you have left is the alt. no fan pulley or mount or anything. i think that would look hella clean in my bay. i need to do this.
mazdamn   +1y



closest pic i have in my photobucket.
dropped90(justin)   +1y
yeh i need to do that. the fan is so gauky and takes up alot of space. what size relay are you running. im not much for wiring. i guess you put a relay between the fan and toggle switch or how does that work? im probablly just going to want to run it to my ignition to be on all the time because i have had systems with a toggle before and forgot about them and had a dead battery all the time
mazdamn   +1y
Yeh, go to the ignition, a 30amp is fine. Its what I used. If you get the fan and thermostat new, it'll have the relay
87mazdamini   +1y
How about a 96 1.8 miata block with a 99 miata
head(mechanical lifters and a turbo manifold will bolt to it) with a t3 turbo and timer and oversized injectors??? Msd box and coils for good spark??? 2.5 inch exhaust ??? Close to a 302 but quicker and better ratios as far ass tranny's go. Gas milage better too. My buddy hates his 302 cause of the milage he gets.
dropped90(justin)   +1y
i've been wondering about the miata. i dont ever hear anything about them. would they bolt to our tranny or could you just use theres since its rwd? these things can make some good power
87mazdamini   +1y
I was told you can use either just swap the bell housings or if you want the miata tranny you have to swap the tail housing too. This was from a miata enthusiast with 28 years experience ase certified owned 3 miatas and drives an 04 lotus elise but works at a GM dealer ship lol smart guy though. Iv'e heard it from other sources too though so he is probably right.
87mazdamini   +1y
basicly I guess mazda made 3 trannys with different bell housing/tailshaft configurations for the RX_7, the Miata and our trucks. And I know a guy who has a miata tranny in his B2200. 302's are nice but I want to shit and get not shit and sit!! lol
hocbj23   +1y
MazDAMN: I didnt say everyone runs a Flexalite,I was giving some input to a member whos asked about mods.Everybody has an opinion (just like everyone has an a--hole).SPAL might be a good fan,I dont know.Flexalite IS a good fan,this I do know cause I run one.Why dont u just give ur input without all the 'tude u put with it and let the person with the question make up their own mind.BJ
mazdatweaker   +1y
post deleted
Post was last edited on May 14, 2009 06:05. This post has been edited 1 times.