S10 project..Bagged..Bodied.... !!update

Its just dusty and dirty. Lol. Once its pressure washed itll look muuuuch better And yes, actually, I am doing this at an apartment, haha, My neighbor only has one car and is allowing me to use his other spot for my bed to chill haha. Today the weather was nice, and I pulled the old pump and the screen as filthy, So I put a new screen in, new pump and new strainer. Also installed the new relay. But to no avail the freakin pump still isnt working haha,So Im going to grab my volt meter and start checking for voltage at each contact. Thats planned for the next day off

man that rocks. my last appartment i lived in i couldnt even change a flat tire on the property.

Lol, Ya Im kinda lucky. I GOT IT RUNNING TODAY!! Still not entirely ready to drive lol. But it is running great. I need to rewire the fuel pump and sending unit, Theres a break in it somewhere that I need to find between the relay and the unit. But with pump jumped it works and runs great! Also... the digital cluster NEVER worked for Eric or I and as you all know I rewired the harness and fixed a lot of stuff.....and vualla the cluster works! Need to figure out the oil pressure sending unit, and the temp sending unit... and the fuel gauge. The fuel is easy, and so is the oil pressure sender. So probably next week Ill have all that sorted out. Im stoked!! Im uploading a vidoe right now.. ANyone know how to reset the odometer on these gauge clusters? My truck has only 86xxx on it but this odometer has freakin 213990 miles on it lmao. I dont wanna rock that lol.

great man thats sweet

HELLS YEAH

Cleaned out the interior a lot, Removed the last bit of excess wiring from the truck and and now ready to scuff the floorboard and paint the fllor with some primer, and then actually shoot a coat of flat black then 2-3 layers of fat mat, All in the next few weeks. Once thats all done Im going to go ahead and start re installing the interior

Well, Got the interior tiny rust spots ground out and started spraying down some rubberized coating, That 3M stuff is awesome, Just doesnt go a long way haha.

Also got my fuel pump wired in properly and also figured out the tank sending unit. ALSO.... there has been an electric fan in the truck since it was Bd'd and it never worked right, It had a thermal switch BUT the fan somehow stayed on ALL the time!, As I was taking the wires and stuff out of the truck since im replacing everything I realized the relay wasnt wired properly,a nd once it was guess what.... It worked perfectly.. So Im going to fully wire the fan and the EDC as soon as its not raining Oh also did a lot of clen up on the truck gave it a good wipe down, Ran the engine for about 20min and it ran great! the thermostat opened up properly too.

Well, The s10 is running great and consistently. Got everything hooked up, airride is all functional again too! I need to now re figure out my gauge cluster cuz all the sudden it stopped working again.. Getting power to the cluster so? I dunno yet. Also still nothing to the rear half of the truck (No taillights or anything) Until those 2 things are figured out I cant throw it back together and start actually finishing it. All the stuff Im doing is the stuff that de motivated Eric and myself before lol, Hopefully I work through it before I lose motivation..... JUST KIDDIN, I would never! Oh Oh also... Met a new girl. Lil different change of pace.. Shes 30, divorced and has 2 kids. Theyre all awesome! Im hella happy!

keep us posted man

I got an 85 s15 Blazer 4wd recently, And decided to build a box for these 4-8"s and see how they sound in the Blazer... They sound wonderful Going to put these in my civic once its running again, and Still waiting for the silicone to dry on my 12" so I could build a box for it for my blazer.
Each sub requires 0.5 cubic feet in a ported box tuned to 35hz. This box is 2.007 cubic feet and tuned to 35.013hz.. Id say as close to perfect as possible