Control Arms?? Who can make some!!!

Originally posted by DurangedKustoms



seth talked to you before about ones for a d50/MMM, I got a set of uppers that are from BYC, I also got a stock set I can send you. I would be interested in gettin some uppers made the BYC uppers would make a good jig. I wanted to get ones just like it but adjustable. LMK call me at 480-495-3657 ask for mike

If you are still interested send me some pictures of the arms from BYC. I'll see if I could possible make them adjustable.

Originally posted by LAYEDOUT69



what about some uppers for a 64 Nova/Chevy II ??

If you want to send me a set of stock arms, and let me know what you need changed in the design, or if you just want tube arms, let me know.

Originally posted by draggindakota



How bout some gen2 dakota arms? PM me, mabey we can work something out.

If you want to send me a set of arms and help prototype them, then yes.

I did a newer ranger a few years back.And to help correct all of the camber issues i used a screw in ball joint and weld ring.Welded the ring into the lower arm and reamed the spindle to fit.And raised the upper control arm mounts 2-2.5 inches and it worked great. the caster and camber all most went away.
Just had lil bumpster when laied all way out.

Josh
615-220-9001

Originally posted by blazedbowtie82



Depends on what you want. I make arms with stock bushings that accept stock balljoints (as long as they're not press in) for $120 shipped for the upper pair. With heims for adjustability it would add the cost of the heims.

Dude, don't you think he can do better than heims

I could use some for the caprice if you can make em.

Originally posted by blazedbowtie82



Originally posted by draggindakota



How bout some gen2 dakota arms? PM me, mabey we can work something out.

If you want to send me a set of arms and help prototype them, then yes.

Think you could handle 521 arms? Really looking for a lower to ditch the control rod. Kinda like you did yo your toy. But there is so little room. If you could make some 521 arms upper and lower i know around 30 or so people that would buy them.

Edited: 7/13/2006 10:47:35 AM by jbaker72157

need some uppers for a chevy colorado and so do alot of other peeps

bump

Like I said, PM me if interested. Just so happens I see this now. Send me a message if you're interested and I'll try to work with you.

And Kyle, I'm not following you.