pics please 98 style ranger front bags

I know rangers very from truck to truck a little but this just dosen't make sense.

Originally posted by dragwithme



Edited: 12/19/2006 7:39:58 PM by dragwithme

__--OK--__ YOU CAN "NOT" LAY OUT A 98 AND UP RANGER W/18 W/STOCK ARMS UP FRONT WARE YOUR X-MEMBER SITS FLUSH ON THE GROUNG....NO WAY..... I DOVE WITH 18S FOR ABOUT 3 YEARS AND TRYED ALMOS ANY THING TO GET IT TO LAY IT WAS NOT POSSIPLE.....I CUT I SAW SAW I GRINDED.....NOTHING ......YES YOU NEED SOME KIND OF AFTERMARKET PARTS TO GET THIS TO LAY AND NO I DONT KNOW WUT YOU NEED TO GET IT TO LAY FLUSH ON THE GRONUD...BESIDES USING A SET OF 17S MIGHT GET IT CLOSE BUT YOU WONT LAYYYY...AND IF YOU HAVE THE FRONT BAGED AND NOT THE REAR THEN YES IT WILL LAY X MEMBER ON 17S 18S EVEN 20S MAYBEMY RANGER IS DOORED 0N 20S AND NO IT DOES NOT LAY X-MEMBER

Mine lays xmember.

^^^^ thank you ^^^^^ !!!!!!

im cornfused, i still dont see how you have the only ranger in the world that can use all stock components and lay the front engine crossmember.

Time I think I should mark my calender, this is the first and second time ever I have seen you not use the capslock, lol.

And Andy, yours lays with DJM, correct?

Dragwith me, how far off the ground is your engine crossmember? Why didn't you break down and by the parts to make it lay? Couldn't you have less engine out your hood if you made it lay?

^^^^ AND THANK YOU AS WELL MIKE ^^^!!!!!

THE FACT THAT I DIDNT USE MY CAPS LOCK WAS A COMPLETE ERROR -- I MAY HAVE TO EDIT THOSE RESPONSES -- I LOVE CAPS LOCK -- HAHAHA !!!

I have BYC tube lowers with moog balljoints and djm uppers with factory balljoints and my truck lays crossmember. I can even put a 2x4 under the wheels and it will lay. I def. had to notch for the tierod ends (alot), I am running a 245/35/20. Now what? I think it might also have something to do with what cups and bags you use.

Originally posted by complexdesigns



Originally posted by dragwithme



Edited: 12/19/2006 7:39:58 PM by dragwithme

__--OK--__ YOU CAN "NOT" LAY OUT A 98 AND UP RANGER W/18 W/STOCK ARMS UP FRONT WARE YOUR X-MEMBER SITS FLUSH ON THE GROUNG....NO WAY..... I DOVE WITH 18S FOR ABOUT 3 YEARS AND TRYED ALMOS ANY THING TO GET IT TO LAY IT WAS NOT POSSIPLE.....I CUT I SAW SAW I GRINDED.....NOTHING ......YES YOU NEED SOME KIND OF AFTERMARKET PARTS TO GET THIS TO LAY AND NO I DONT KNOW WUT YOU NEED TO GET IT TO LAY FLUSH ON THE GRONUD...BESIDES USING A SET OF 17S MIGHT GET IT CLOSE BUT YOU WONT LAYYYY...AND IF YOU HAVE THE FRONT BAGED AND NOT THE REAR THEN YES IT WILL LAY X MEMBER ON 17S 18S EVEN 20S MAYBEMY RANGER IS DOORED 0N 20S AND NO IT DOES NOT LAY X-MEMBER

Mine lays xmember.

Yes mine did to ....I ment to say engin xmember......my bad

I'm pretty sure that's the crossmember he was talking about. Andy's lays the engine crossmember.

I dragged my crossmembers off on stock arms.