AIM/Chassis Tech Discussion - Get Help

--------------------------------------------- Originally posted by joemorrow --------------------------------------------- Originally posted by low mazda --------------------------------------------- Originally posted by joemorrow --------------------------------------------- Originally posted by joemorrow --------------------------------------------- Originally posted by low mazda well all four of my bags are 2600 pound bags. if you tested all your 2600 pound bags, how come only two of them have had fittings installed.   And you are wrong, I am one of the easiest people to please. Whick is why I was going to try you guys even after all the dis-belief.   I am not going to ship them back, because they work, but when I buy something from a company I just don't expect to recieve a product that looks used. I am not and never did say they were used, I have no clue what was done with them befor I took possesion of them, however I stated that they look that way. But I will solve all this by ordering from somewhere else from here on out.   But thanks for trying to help me. I do appreciate that.` --------------------------------------------- Low Mazda... Then why don't I just ship you 2 more bags no charge to show you that we are straight shooters.  You can take advantage of me by getting free stuff.  We DO NOT ship used bags and if you really believed they were used, then you would have taken a picture and posted it.  Now lets see if you want FREE bags..  Give them to your friends, do whatever you want, but please give me credit for responding to your every complaint, founded or unfounded.  In fact, I will post a picture of your original order on the forum for everyone to see and judge for themselves.  Just give me the NAME/ADDRESS/PHONE you ordered under and we will put this to rest... Fact is, I do not believe you received, nor ordered 4 #2600 bags.  If I am wrong, please accept my apology in advance, but I simply do not believe you are being honest here..  Free bags, all you have to do is give me the name/address/phone.   Travis, (in shipping)  please do a search on bags shipped on a Mazda for the past 30 days, and give me the picture to post on the forum.  I do not believe this guy, but we will post the picture no matter who is right or wrong...  C'mon low Mazda, everyone is waiting for the results of my challenge.   Sincerely, Joe Morrow --------------------------------------------- Low Mazda... My name is Joe Morrow and you can contact me at joe@chassistech.com  If you have nothing to hide, then the world is waiting for you to tell me who you are... I will post a picture of your order online for all to see and make up their own minds whether you are just yanking my chain, or you have a honest gripe.  And of course, I will send you two new bags, and you can keep them all.  Show me your name...  everyone is waiting --------------------------------------------- My name is Brandon Wesley Blitch. My phone numbers are 478-256-8198 and 478-225-6459. My address is 400 Grand Avenue Bonaire, GA 31005..   I have nothing to hide. You can do all the searching you want for someone that has ordered 4 2600 pounders for a mazda and your not going to find anything. Just because that's my name on here, don't mean that's what I am building. You see unlike yourself, I have been a member of this site for going on 8 years, and have been a moderator for the last 2 years, so everyone here knows me. That was what my name was almost 8 years ago, because that's what I had. I currently have another fullsize chevy. 1988 to be exact. I have been through about 4 different bagged trucks that I built through the help of folks on this site.   As far as the pics of the bags, it would be useless to show you pics of them now, because I put them in my truck, so now they are used. SO your right, I have no proof that they looked that way. And here you claiming I said they were, when all I said was that they LOOK to be, never said they were. As I stated, I have no clue what heppened with them befor I took possesion of them. If you feel sending me two more is the right thing, then do so. I am not asking for that, I was just making some statements that I felt was compelling to this thread.   Thanks for your time, Brandon Blitch brandon.blitch@yahoo.com --------------------------------------------- Thank you Brandon, and your email explains a lot.  You are off the mark here.  It is I that has the picture.  We take a picture of everything we send, so I expect to find the picture of your bags and post it for everyone to see, GOOD or BAD.   I never asked you to take a picture. Secondly,  explaining to me that you are a moderator should not go down well with the members overall.  As a moderator, you are expected to be objective, and not subject your members to unsubstantiated assumptions.  You clearly have taken the low road and assumed the bags were used, when I know they absolutely are not used whatsoever.  I have never had any doubt that Moderators have a share of contempt for our company and your postings as a Moderator show that you are quick to "judge" when an opportunity to malign our company exists.   You are in a position of influence as a moderator and it is my opinion that your influence should be used for the good of the truckin community, not to tear down a relationship that I am trying to build for the good of the entire community, not just ourselves.  Brandon, you of all people, a Moderator, should read this entire thread which CLEARLY shows that I am here to resolve any issues, real or imagined, and allowed me that opportunity.  Instead, you chose to jump to a conclusion that is wrong.  Any reader of this thread knows that you as a Professional Builder and Moderator, would have REFUSED to put a used bag on his project.  You would also have leaped at the opportunity to post a picture of this "used" bag on the site.  It is untrue and you and I both know it.  Both bags were tested, even though only two had teflon tape as a result of the test.  We went to a pneumatic thread sealer to test them which seals without teflon for testing purposes.  The factory tests them for leakage in this manner, so why can't we?  I would rather have a fragment of teflon tape on a bag that take a chance of any possible leak.  So far, we have found 3 leaks in 1000 bags, and for me, that is not acceptable.  Do your really think that Slam, Airlift (who buys from same China Company, has never had a leak??   PLEASE back off of me unless you can prove your claims.  I am here to listen and act on constructive criticisms, and your posting draws wrongful conclusions... again, why would you as a Moderator of this site, install a pair of used bags.  Why would we even have a pair of "used bags" that did not work for another customer, but, as you admit above, work for you?  Give me a break and lets get back to taking care of real problems for your members.     I expect to post a picture of your shipment along with your invoice on the site ---------------------------------------------

I am sending Brandon Blitch two bags today, along with spring pocket eliminators.  The first bag is a #3800 that is 8.5" wide, allowing you to install a very large bag in the larger frames like C1500,C25009,C3500 because a #2600 bag takes too much pressure to lift.  Since Brandon is a fabricator, perhaps he will consider the benefits.  Also note it has 1/2" Compression Fittings installed as an option.  In the past, a Big Block might not lift at all, or it takes 180psi to do it and the ride is like  no springs at all.  I will send any fabricator this setup for one side, and if you like it, then you can buy the other side for $75 and you will have a pair.

--------------------------------------------- Originally posted by joemorrow I am sending Brandon Blitch two bags today, along with spring pocket eliminators.  The first bag is a #3800 that is 8.5" wide, allowing you to install a very large bag in the larger frames like C1500,C25009,C3500 because a #2600 bag takes too much pressure to lift.  Since Brandon is a fabricator, perhaps he will consider the benefits.  Also note it has 1/2" Compression Fittings installed as an option.  In the past, a Big Block might not lift at all, or it takes 180psi to do it and the ride is like  no springs at all.  I will send any fabricator this setup for one side, and if you like it, then you can buy the other side for $75 and you will have a pair. --------------------------------------------- Here is the 2nd bag I am sending Brandon today.  It is a #2600 DeNominator with a spring pocket eliminator that can be installed in any Mini or midsize with coilspring suspension. Also, when you use these setups, you do not need barrels on the top.  Just determine your height, tackweld, if you like it..  Weldit on.  Air access is thru the top of your shock tower.  I will be happy to send any fabricator one for review, then give you the mate for $75 if you like it.  Bottom line is you are paying only $75/pair and you get to judge for yourself the quality of our products.  Please take me up on it.

--------------------------------------------- Originally posted by joemorrow --------------------------------------------- Originally posted by joemorrow I am sending Brandon Blitch two bags today, along with spring pocket eliminators.  The first bag is a #3800 that is 8.5" wide, allowing you to install a very large bag in the larger frames like C1500,C25009,C3500 because a #2600 bag takes too much pressure to lift.  Since Brandon is a fabricator, perhaps he will consider the benefits.  Also note it has 1/2" Compression Fittings installed as an option.  In the past, a Big Block might not lift at all, or it takes 180psi to do it and the ride is like  no springs at all.  I will send any fabricator this setup for one side, and if you like it, then you can buy the other side for $75 and you will have a pair. --------------------------------------------- Here is the 2nd bag I am sending Brandon today.  It is a #2600 DeNominator with a spring pocket eliminator that can be installed in any Mini or midsize with coilspring suspension. Also, when you use these setups, you do not need barrels on the top.  Just determine your height, tackweld, if you like it..  Weldit on.  Air access is thru the top of your shock tower.  I will be happy to send any fabricator one for review, then give you the mate for $75 if you like it.  Bottom line is you are paying only $75/pair and you get to judge for yourself the quality of our products.  Please take me up on it. --------------------------------------------- Travis, Please send Brandon Blitch the pair of bags today No Charge and freight No Charge.  No strings attached Brandon, just give me an honest posting after you get them and lets put this to sleep..

Edited: 3/11/2009 1:00:15 PM by low mazda

 Well, I alreay told you I didn't want them. You don't have to send me anything. As Brandt stated those pics don't show anything that has anything to do with my original statements. I don't care anything about the spring pocket eliminators. I will not use them as my bags are already in my truck with cups from Suicide Doors. I am not taking it apart. I never claimed to be a fabricator. I know how to weld and I know how to instal a complete air ride system. I have done a few, but I would never call myself a Fabricator. I am a sheetmetal mechanic for the US Govt.  I never asked for anything in return, I was just stating my opinion that they looked used. I never said they were.  Like Brandt said, me being a MOD on here has nothing to do with my personal experience with you and your company. I tested the bags myself with fitting and plugs to make sure they would not leak befor I installed them. That's why I would install a part that looked used. As far as I am concerned this issue HAS been put to rest. You can send me what you want, but if you want to send me stuff, I don't care for the spring pocket eliminators, as they won't get used, and a 3800 pound bag will be deemed useless to me also. Thanks for trying to make this right though, I do appreicate that. Brandon Blitch... and BTW, what does my email address have anything to do with my integrety or anything else for that matter? And thank you Brandt.

--------------------------------------------- Originally posted by low mazda Edited: 3/11/2009 1:00:15 PM by low mazda   Well, I alreay told you I didn't want them. You don't have to send me anything. As Brandt stated those pics don't show anything that has anything to do with my original statements. I don't care anything about the spring pocket eliminators. I will not use them as my bags are already in my truck with cups from Suicide Doors. I am not taking it apart. I never claimed to be a fabricator. I know how to weld and I know how to instal a complete air ride system. I have done a few, but I would never call myself a Fabricator. I am a sheetmetal mechanic for the US Govt.   I never asked for anything in return, I was just stating my opinion that they looked used. I never said they were.   Like Brandt said, me being a MOD on here has nothing to do with my personal experience with you and your company.   I tested the bags myself with fitting and plugs to make sure they would not leak befor I installed them. That's why I would install a part that looked used.   As far as I am concerned this issue HAS been put to rest. You can send me what you want, but if you want to send me stuff, I don't care for the spring pocket eliminators, as they won't get used, and a 3800 pound bag will be deemed useless to me also.   Thanks for trying to make this right though, I do appreicate that.   Brandon Blitch...   and BTW, what does my email address have anything to do with my integrety or anything else for that matter?   And thank you Brandt. --------------------------------------------- You are welcome Brandon.  I have the bags ready to go, so I am sending then anyhow no charge along with one eliminator.  If you ever have a problem with the bags, you know where to reach me.   Your email has nothing to do with your integrity, I do not know where that came from..  Let me know if I can help in the future.

Me again, I recieved my denominator 2600 II's and have been rolling on them for a week or two now and love the smooth ride and the great lift and the quality of the product! I had a small personal issue with my spring pocket rubbing on one of the fronts and it cut through the first layer of rubber and bands inside but still holds fine with no distortion at all and after the smoothing adventure in the spring pocket. It does seem that the denominator II bags have  a lil more diameter when under a load than the slams, contitech, firestones I have used in the past but rollover is not at all a problem with these wich is really nice.  So for peice of mind and to be safe I called AIM today and have to say Yuri is awesome and is a picture of customer service and is a pleasure to do business with! I see more business in the future........

---------------------------------------------Originally posted by ProHopperMe again, I recieved my denominator 2600 II's and have been rolling on them for a week or two now and love the smooth ride and the great lift and the quality of the product! I had a small personal issue with my spring pocket rubbing on one of the fronts and it cut through the first layer of rubber and bands inside but still holds fine with no distortion at all and after the smoothing adventure in the spring pocket. It does seem that the denominator II bags have  a lil more diameter when under a load than the slams, contitech, firestones I have used in the past but rollover is not at all a problem with these wich is really nice.  So for peice of mind and to be safe I called AIM today and have to say Yuri is awesome and is a picture of customer service and is a pleasure to do business with! I see more business in the future........--------------------------------------------Matt,Sounds like you have to trim just a little more out of your spring pockets.  Trimming is GOOD because it allows the larger bag to fit.  The larger the bag, the less PSI it takes to lift, and the smoother the ride.  Spring Pocket Eliminators, do just what the name implies.  Eliminates the Spring Pocket and eliminates the Barrels on top of the bag, allowing you to seat the bag at the exact height for your intended drop. Tack weld in place, and once you are satisfied with the position, weld it!   I will be happy to replace the bag for a token charge of $25 including shipping.  Yes it is still save as long as the cord has not been damaged.Here is a pix of a Spring Pocket Eliminator with a #3800 8.5" Diameter bag

hey joe yall are sending me some replacement struts for my 06 hhr. am i gonna get a tracking #? all i got was an email saying they would be shipped last wed.

my 3rd bag just snapped the studs of the bottom,only complaint i have with them so far..and had them a FEW yrs.