AIM/Chassis Tech Discussion - Get Help

---------------------------------------------Originally posted by garagebuilthey joe yall are sending me some replacement struts for my 06 hhr. am i gonna get a tracking #? all i got was an email saying they would be shipped last wed.--------------------------------------------- Garagebuilt,We did ship your replacement struts last week.  If you send me an email I will forward the tracking info to you.  travis@chassistech.com. Travis 

---------------------------------------------Originally posted by SoloSpecialtiesmy 3rd bag just snapped the studs of the bottom,only complaint i have with them so far..and had them a FEW yrs.

--------------------------------------------- Solo,We have changed all of our bags to female holes.  I can replace any bag for $25 each.  If anybody out there has a bag that they want to replace.  No matter how old or what brand bag it is, we will replace it for $25. Just send Joe or Myself an email, we will give you a RA#.  Send it back and we will replace it.  It can be a Firestone, Goodyear, Slam it doesn't matter.   Travis

---------------------------------------------Solo,We have changed all of our bags to female holes.  I can replace any bag for $25 each.  If anybody out there has a bag that they want to replace.  No matter how old or what brand bag it is, we will replace it for $25. Just send Joe or Myself an email, we will give you a RA#.  Send it back and we will replace it.  It can be a Firestone, Goodyear, Slam it doesn't matter.   Travis---------------------------------------------

Travis, does the same apply on blown bags of another brand?  And what if I sent in (2) Firestone 2500's, could I get 2600's in exchange thru this offer?

Thanks Joe but I have already spoken with Yuri and ordered a replacement, no big deal it was my fault it rubbed but I am deffinately going to look into a set of the spring pocket eliminators! Keep up the good work guys and thanks for exceeding my expectations!

---------------------------------------------Originally posted by ProHopperThanks Joe but I have already spoken with Yuri and ordered a replacement, no big deal it was my fault it rubbed but I am deffinately going to look into a set of the spring pocket eliminators! Keep up the good work guys and thanks for exceeding my expectations! ---------------------------------------------and I love you......Thank you for being fair with us.  Joe Morrow

ha ha so you like my new signature? figured I would do some free P.R. in the south eastern scene hopefully Yuri sends me some stickers and I will fly em with pride!

---------------------------------------------Originally posted by ProHopperha ha so you like my new signature? figured I would do some free P.R. in the south eastern scene hopefully Yuri sends me some stickers and I will fly em with pride!

---------------------------------------------I LOVE you Prohopper, because that is what we are really about.  Thank you so much,  

ok me again.  i am writing this because in my invoice i got  from you, it says to post up about my experience.  with no luck finding anywhere to get them, i ordered some rebuild kits for my dc5000s from you. after waiting for weeks after i ordered, i did not receive the cylinder wall sleeve with the kit.   so after almost 100 bux later i still cant use my compressors that only worked for less than a month to begin with.  i was really disappointed when yuri told me the cylinder wall is not available anymore and to just to buy new compressors from you.    i bought these dc comps from you years ago and paid alot of money for them just to use them for less than a month.    why would i just scrap them and buy new ones again from you?  still no luck with your company.    everything i have got from you ( 2- dc 5000's, 2- sanden edc kits) have failed. i have been trying to get the rebuild parts for the dc compressors and 2 new back plates for my sd5 h14 compressors for years and years with no luck.  this is what has given your company such a bad name on all the forums.      

---------------------------------------------Originally posted by low mazda---------------------------------------------Originally posted by joemorrow---------------------------------------------Originally posted by low mazdawell, I went and ordered some bags. Thought I was ordering some single port bags and they came double port. 2 of them look used and have teflon tape in the ports. I done this against my better judgement, and did anyway. I won't again. I needed the bags asap, so there is no sending them back, so I just had to plug one hole on each bag. Anyhow, I learned my lesson, and will stick with the smaller company's from now on. After the expensive shipping from AIM, it would have cost the same from somewhere else anyhow. This is my personal experience and this is my situation. No helping it now. ---------------------------------------------From Joe Morrow&nbsp; (Low Mazda)&nbsp; img{max-width:720px} A member said that he was upset with us because two of the bags looked used.&nbsp; They were NOT used.&nbsp; We experienced a customer that had a small leak a few weeks ago on a #2600 bag, so we took the time to Leak Test each and every #2600 bag under pressure/water&nbsp; before shipping them.&nbsp; &nbsp;Now I get into trouble for leaktesting a bag?&nbsp; This is not right, I just wanted to test before shipping.&nbsp;Yes, the bags had dual 1/2" ports, but we should have sent plugs to seal the extra port.&nbsp; It is possible they were left out of the shipment.&nbsp;We NEVER ship a used bagJoe Morrow <!-- "' -->---------------------------------------------Joe, if that's the case, how come only two of them have used threads? I am a mechanic and I can tell when something has been threaded. Two of them still have the rubber plugs in all the holes, and no tape in the threads. The two that do have tape in the threads also have rust in the threads. Sounds like a liley excuse that was made up after someone bitched. Like I said, I tried against my better judgement to buy from you guys, and after these bags, I will not again. Shipping prices are way too high, and the quality is still not there. I didn't expect a change overnight, and I hope all the rest of your customers can stay happy. I was definately hoping for a better experience with you guys than what I have read about and it didn't happen. I am going to use the bags, and if anything happens with them, I will throw them away and buy some Slams. ---------------------------------------------I can't believe some people have all this time to complain! Were you planning on using plexiglass bag plates? clean off the rust and tape and move on man!

---------------------------------------------Originally posted by draggingbodyok me again.&nbsp; i am writing this because in my invoice i got&nbsp; from you, it says to post up about my experience.&nbsp;&nbsp;with no luck finding anywhere to get them, i ordered some rebuild kits for my dc5000s from you.&nbsp;after waiting for weeks after i ordered,&nbsp;i did not receive the cylinder wall sleeve&nbsp;with the kit. &nbsp;&nbsp;so after almost 100 bux later i still cant use my compressors that only worked for less than a month to begin with.&nbsp;&nbsp;i was really disappointed when yuri told me the cylinder wall&nbsp;is not available&nbsp;anymore and to&nbsp;just to buy new compressors from you.&nbsp; &nbsp;&nbsp;i bought these dc comps from you years ago and paid alot of money for them just to use them for less than a month.&nbsp; &nbsp;From Joe Morrow:This is simply a distortion by draggingbody.&nbsp; First, why would Draggin want a rebuild kit for compressors that failed after 1 month, and now it is two years later.&nbsp; What Draggin does not tell you is that he ordered the rebuild kit shown on this link:&nbsp;&nbsp;http://airbagit.com/advanced_search_result.php?keywords=compressor&amp;srpMakeFld=--+select+--&amp;srpYearFld=All+Years&amp;srpProductFld=0&amp;search_in_description=1&amp;inc_subcat=1&nbsp;&nbsp; &nbsp;&nbsp;That is what he ordered, and that is what he received.&nbsp; The cylinder is not even offered by us..&nbsp; However, I will be happy to find him a couple of cylinder heads if he emails me at:&nbsp; joe@chassistech.com&nbsp;&nbsp;&nbsp;&nbsp; I would also like to point out that I have stated numerous times on this forum that if you have any issues, contact me, that is what I am here for to SOLVE issues, not to reply to obvious distortions of the true facts.&nbsp; Draggin, just give me your purchase info, I will look up the ACTUAL facts and report them without distortions.&nbsp; Geez, it took you two years to order the rebuild kits??&nbsp; And if that is not good enough, I will offer him two compressors at 1/2 price, even though they are more than two years old...&nbsp; Give me a break!&nbsp;&nbsp;still no luck with your company.&nbsp;&nbsp; &nbsp;everything i have got from you ( 2- dc 5000's,&nbsp;2- sanden edc kits) have failed. i have been trying to get the rebuild parts for the dc compressors and 2 new back plates for my sd5 h14 compressors for years and years with no luck.&nbsp;&nbsp;this is what has given your company such a bad name on all the forums. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;---------------------------------------------