Bagged daily

Agreed. I just used the Monroe catalog online. The front I may have used Nissan Hardbody shocks. But nothing special. Just cheap ones. Whenever they blow, I'll replace them. As long as they aren't bottoming out or overextending.

I'm using 2wd nissan hardbody shocks in the front and 4x4 shocks in the rear. With the bags on the bars I had a hard time finding a shock that had enough travel. Autozones site has lengths too but you have to select the make and model

Thanks for the shock info guys. I didn't know if I needed special shocks for adjustable suspension. So what are some good places to get parts?

Sent from GS2 on Tapatalk

Airbag parts? I bought my fittings at a local Parker store. Be prepared to spend some $$$ good fittings aren't cheap. 4 link and bag brackets from suicidedoors.com. Check with our forum sponsor modPLANT and see if they can get you a deal. Or there's always Ebay

Nice doesn't look to bad... How much does it cost to narrow a rear end?

Sent from GS2 on Tapatalk

I would think u could get a rearend narrowed for around $300 or so :what:

I concur with mazdizzle. Modplant is a good one. And Thorbreck brothers (aka suicide doors) has everything you will need, but sometimes shipping sucks from them.
Airedup.com has a good selection of fittings.
I've bought lots of air management stuff from newmaticsinc.com as well.


I had a professional machinist that specializes in narrowing rears narrow mine for $490. He also putting an RX7 diff in it for Limited Slip.

Give or take... About $600 if you can use your axles. About $400 more if you need new axles.

Yeah ill flare the bedsides...

Sent from GS2 on Tapatalk