1990 B2200 Ground Up

If you want to sell it let me know. Or anyone in the AUS that can get one holla!

Theres a few guys on instagram that can put stuff in shipping containers but i still think a rack is a better option

Hmmm, I need to look into someone there that can ship one. Should be able to wrap one up in a plastic bag and ship it in a UPS box.

Its not cheap...

Ok, I made a drawing of the front section of the frame, side view.



This is moving all the arm mounts 2" for better cross member clearance then moving the upper arm mounts up 4" which is the same as the spindle.

This will be with triangulated tubular lower arms.

As soon as I make a final decision on what size wheels to run in the front I will be able to see what the arm angles will look like slammed and raised.

Can't draw anything forward of the arm mounts until I figure out what box or rack to use.

Nice and simple!

I ship heavy stuff there all the time. But you are right a rack would be better.

That drawing is the with the lower arm raised 2" the frame raised 4" and the upper arm raised 6" to compensate for the 2" raise in the arms and the 4" the balljoint flip gets.

I am making wood pieces to simulate it and if it cycles up and down with good camber then I will start looking for a rack.

What camber numbers are you trying to achieve?