***SkrapinSask from stock to layin frame***

I was just waiting to plumb bob my axles so i have perfect center for my notches before i pulled the leafs!
I'll get the front finished up first!

I was told the little hole on the top of the frame was center point for the axle, because I didn't check mine before I ripped it off... anyway I'm planning on welding my notches in this sat, so if you check before that and its not center with that little hole, shoot me a message with the measurement to the center point, so I get mine in the right spot thanks man.

i will let you know if its at that hole or the distance it is from the hole!

SONDS LIKE YOU MOVING PRETTY DECENT PASE

is that a secondary proportioning valve bolted behind the pass side rear tire?
i didnt have that , what year and body is this?

Its always exciting when the box is exposed!! <img src="{SMILIES_PATH}/icon_redface.gif" alt=":oops:" title="Embarassed" /><!-- s:oops: -->

its abs some of these truck had it and some didn't

possile to eliminate the abs box? or do most of you guys just rebend custom hardlines to it?

You can get rid of it. Its pretty much worthless anyways.

pretty much ready to be welded up

looks good... nice and clean